Large Photo
PDF Spec Sheet
Back to the Top |
Bare Board Loader
The BBL is designed to pick printed circuit boards from a stack, place it on a set of conveyor rails and deliver it into the process.
- Operates to load bare boards, or transfer product through
- Precision slide quick width adjustment
- Single color light tower
- High Capacity ? allows for up to 18 inches of product
- Enhanced vacuum pick-up system
- Quick set-up for aligning lift cups to PCBs
- ESD grounding receptacles
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Transfer Conveyor
Transfer conveyor used to buffer, transfer or audit one or more PCBs depending on the configuration.
- Programmable Logic Controller
- Precision slide, quick width adjustment
- "Look-up" product sensor
- ESD grounding receptacle
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Edge Carry Workstation
Workstation conveyor used to buffer, transfer or audit a single PCB.
- Programmable Logic Controller
- Hand crank for width adjust at front of machine
- Operator controls (E-Stop, Reset, Release, Audit/Bypass)
- "Look-up" product sensor
- Overhead light, rear parts shelf and footrest
- Power outlet strip
- ESD grounding receptacles
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
FIFO Storage Buffers
A vertical buffering conveyor (first in, first out) providing up to 20 board capacity, that allows control of varying PCB flow.
- Programmable Logic Controller
- Hand crank width adjustment
- Touch screen interface for machine status viewing
- Advanced touch screen controls with password protection
- Audible alarm / 3 color light tower
- Selectable pitch settings (1", 2" or 3")
- ESD grounding receptacles
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
LIFO Storage Buffers
A vertical buffering conveyor (last in, first out) providing up to 55 board capacity, that allows control of varying PCB flow.
- Durable chain drive for vertical lift system
- Programmable Logic Controller
- Hand crank width adjustment
- Touch screen interface for machine status viewing
- Advanced touch screen controls with password protection
- Audible alarm / 3 color light tower
- Selectable pitch settings (1", 2" or 3")
- ESD grounding receptacles
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Turn Unit
The slide and turn conveyor module is designed to accept a PCB and route as a "pass through" or "rotate and off-load" at 90 degrees.
- Programmable Logic Controller
- Shuttle and turn operation
- Precision slide, quick width adjustment
- 90 degree turn capable
- ESD grounding receptacle
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Magazines Spec Sheet
Removable Magazine FIFO Spec Sheet
Back to the Top |
Magazine Loaders and Unloaders
Dynapace's Multi-Magazine Loaders and Unloaders loads and unloads PCBs into magazines from the production line. Up to 5 magazines are buffered (2 empty, 2 full, 1 in process).
- Programmable Logic Controller
- Integrated staging conveyor with pneumatic arm
- Crank width rail adjustment
- Touch screen interface for machine status viewing
- Programmable pitch settings
- Advanced touch screen controls with password protection
- "Look up" sensors product sensor
- Product safe guarding through software and mechanical limits
- 3 color light tower and audible alarm
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes: 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Inverter
Intelligent edge carry conveyor used to invert a PCB for second side assembly.
- Clamshell design for full top access
- Fast "center axis" invert and transfer (10 seconds)
- Programmable Logic Controller
- Dual belt design
- 90-degree turn capable
- Rail width adjustment through "Easy Turn" handles
- "Look up" product sensors
- ESD grounding receptacle
Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Accumulation Conveyors
Accumulates PCBs or pallets by the use of a low-friction chain or by sensing the beginning and end of the product as it enters the conveyor, then indexing for a preset time to create a gap. Applications include unloading ovens, wave solder machines and buffering product between process stations.
- Pneumatic stop at exit to control product flow
- Programmable Logic Controller
- Low friction, flat link polyacetal chain
- Hand crank width adjustment
- "Look up" product sensors
- ESD grounding receptacles
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Incline/Decline Wave Unload Transfer Conveyor
Incline/Decline Wave Upload Transfer Conveyor matches the exit angle of the wave solder machine and then declines the PCB or pallet to transfer to the next process. The unit shown includes an optimal cooling hood on the decline section and hand crank width or follow-the-leader width adjustment to track the width of the solder wave conveyor.
- Programmable Logic Controller
- Variable speed extended pin chain transport
- Welded steel framework
- Banana jack grounding receptacles (2)
- Hand crank width adjustment 3.5" - 18"
- Follow-the-Leader width adjustment available
- Conveyor length: 96" (Other lengths available)
- Extended pin chain
- Optional: Cooling Hood Assembly (8,12 or 16 available)
- Conforms to SMEMA Spec. 1.2 and NFPA 79
|
Large Photo
PDF Spec Sheet
Back to the Top |
Shuttle Gate
Shuttle gate provides automatic walkway through a production line. The shuttle gate automatically transfers product across a clear walkway once the downstream process is ready.
- Programmable Logic Controller
- Supports walkways of 36" - 42"
- Normally Open or Closed available
- Safety "Stop" walkway floor mat (other options available)
- UPS backup system for "auto-retract" during power outage
- "Look-up" product sensor
- Extends to deliver product
- Audible alarm signals walkway closure
- Status light tower (red)
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Lift Gate Open
Lift gate provides a normally closed walkway through a production line. The gate is raised manually for access through the line.
- Programmable Logic Controller
- Dual speed for enhanced process interface
- Custom length or width available
- Supports walkways of 36" ? 42"
- "Look-up" product sensor
- Status light tower (red)
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
RFI/EMI Shielded Enclosure
This 40' Edge Carry Conveyor is designed to provide in-line testing of RF emitting or sensitive equipment. It features doors, which open and close to admit and release products, an elevator to lift a customer-provided test fixture in contact with the PCB, and a compartment below to test fixture electronics.
- Radio Frequency Shielded Enclosure
(EMI/RFI shielding effectiveness >60db up to 6GHZ)
- RF tight doors which automatically open and close to admit and
release product
- Internal Lift Plate (for customer provided test fixture)
- Aux electrical compartment (for test fixture support electronics)
- Front peripheral shelf and swivel monitor stand
- RF filtered pass through connectors
- Programmable Logic Controller
- Hand crank width adjustment
- ?Look-up? product sensors
- Light tower and audible alarm
- Power outlet strip inside aux electrical compartment
- ESD grounding receptacles
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes one standard communication cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Vertical Lift Unit
VLU receives product from upstream conveyor, then raises or lowers to the desired level and transfers the product out.
- Programmable Logic Controller
- Line level through transfer
- Adjustable entry & exit height custom designed for your application
- Variable speed (10 ? 50 fpm) (3 ? 15.24 mpm)
- Precision slide for quick width adjustment
- Designed for minimal maintenance
- ESD grounding receptacles
- Conforms to SMEMA spec. 1.2 and NFPA 79
- Includes 1 standard communications cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Lift Tilt Feed Conveyor
24? LTF receives product from upstream conveyor then lowers and tilts to provide lower than line level feed to various downstream wave solder machines.
- Programmable Logic Controller
- Adjustable Feed incline angle (0 - 7 degrees)
- Adjustable entry & exit height 23?- 46" (584 ? 1168mm)
- Precision slide for quick width adjustment
- Designed for minimal maintenance
- ESD grounding receptacles
- Conforms to SMEMA spec. 1.2 and NFPA 79
- Includes 1 standard communications cable
|
Large Photo
PDF Spec Sheet
Back to the Top |
Incline Wave Feed Conveyor
The adjustable incline feed conveyor is designed for easy set-up and alignment. This conveyor is generally used to hand feed various wave solder machines and offers a continuous flow process into a wave.
- Case Controller – Continuous Running
- PLC control available
- Adjustable incline angle (0 - 9 degrees)
- Adjustable height 30"- 42" (762mm – 1067mm)
(on exit side, preset at 6 degrees)
- Variable speed (2 - 25 fpm) (.61 – 7.6 mpm) continuous run
- Precision slide for quick width adjustment
- Designed for minimal maintenance
- ESD grounding receptacles
- Conforms to NFPA 79
|
Large Photo
PDF Spec Sheet
Back to the Top |
Multi Lane Oven Loader and Unloader
The Multiple Lane Oven Loader receives individual substrates from the upstream screen printer and aligns several to load the oven in a multiple parallel lane configuration. Since the unit has an input and an output section, it continues receiving substrates from the screen printer as it transfers substrates to the oven.
- Roller conveyor & flat belt conveyor output
- Number of output lanes dependent on width of product
- Programmable Logic Controller
- Variable speed (0 –20 mm/sec)
- Advanced touch screen controls
- Audible alarm / 1 color light tower
- Electrical enclosure door power disconnect switch
- ESD grounding receptacles
- Precision welded steel framing
- Conforms to SMEMA Spec. 1.2 and NFPA 79
- Includes 1 standard communications cable
|
|
